A Forum run by Enthusiasts of MidNite Solar

PV Combiners => Disconnecting Combiner Discussion => Topic started by: Vic on June 28, 2011, 01:30:01 PM

Title: Does ANYONE know if MNPV-6 Disco is Shipping?
Post by: Vic on June 28, 2011, 01:30:01 PM
Two questions:

1. Is the PV-6 Disco shipping in Config A,  if so,  which vendor might have stock?
2. The overall (Max) height of the unit seems to be missing from the selector, & Manual -- A Brochure states something about "Boxed" dimensions for a MNPV-6,  and weight,  but this is kinna ambiguous,  think that is the outside dimensions and weight of the cardboard "box"ed product  (??).

Thanks,  Vic
Title: Re: Does ANYONE know if MNPV-6 Disco is Shipping?
Post by: Halfcrazy on June 29, 2011, 04:29:35 PM
Vic
Sorry about the delay I have been running in circles and I finally caught my self ::). The PV-6 Disco is shipping I am unsure if anyone is actually stocking them yet though? Looking at the unit when it is hung on the wall its width and height are the same as an MNPV6 the depth is greater do to the handle and about 3/4 of an inch of box for the Slider. Bob Q will be adding the dimensional drawings to the the website asap we missed that. Here is a link to that Dimensional Drawing. http://www.midnitesolar.com/pdfs/MNPV6_dimensions.pdf (http://www.midnitesolar.com/pdfs/MNPV6_dimensions.pdf)

Halfcrazy
Title: Re: Does ANYONE know if MNPV-6 Disco is Shipping?
Post by: Vic on June 29, 2011, 08:04:06 PM
Half!  Thanks,  and good news that the product must be in stock either at MN or at some Distributor.

Thanks again,  Vic
Title: Re: Does ANYONE know if MNPV-6 Disco is Shipping?
Post by: Halfcrazy on June 29, 2011, 08:07:49 PM
Yes it is an exciting time we are starting to get some of these projects to the market the new line of smart combiners will be cool. Built in string monitoring and I am also excited about the little red firebox that will remote trip the dc disconnects.