A Forum run by Enthusiasts of MidNite Solar

Other MidNite Electronics => Other Electronics FAQ'S => Topic started by: Halfcrazy on July 07, 2011, 05:26:20 PM

Title: My MidNite battery monitor always has a red light it never shows full?
Post by: Halfcrazy on July 07, 2011, 05:26:20 PM
The MidNite battery capacity meter will watch for a set voltage and requires it to stay there for 2 hours the following is the voltage it must see to turn the green light on:

          Jumper =     On  /  Off
12 volt battery = 13.65 / 14.25
24 volt battery = 27.30 / 28.50
36 volt battery = 40.95 / 42.75
48 volt battery = 54.60 / 57.00

The most common reason for the red light to stay on is an absorb time that is shorter than 2 hours.