Newbie. The description of the MNPV6-Disco states: "AC and DC can be installed in the same box!"
So, If I am bringing in 4 strings of PV and using up 4 slots with 150v DC breakers... may I run the output from the inverter into the same box and use a single 120VAC breaker in another slot which would connect the inverter output to the AC input of the trailer I am providing power to. (Naturally there would be a separate bus bar for the AC).
Anything completely idiotic about this rig? :>
That will work just fine, It gets used a lot for a 600VDC breaker to the PV in and a 240VAC from the AC side of grid tie inverters.
Sweet. Thanx for reply.
Are there photos or wiring diagrams showing both Ac and Dc in this combiner available?
thx
here is a quick drawing I just tossed together