A Forum run by Enthusiasts of MidNite Solar

MidNite Solar Monitoring software and hardware => MidNite Monitoring FAQ'S => Topic started by: mikeyb40 on January 22, 2020, 07:05:48 AM

Title: Mymidnite Stops data logging after 23:59
Post by: mikeyb40 on January 22, 2020, 07:05:48 AM
I’ve noticed the Mymidnite web logging stops updating data after 23:59 and won’t start updating again until the next morning.

What can be done to fix this issue.
Title: Re: Mymidnite Stops data logging after 23:59
Post by: ClassicCrazy on January 22, 2020, 01:03:19 PM
Seems like I remember someone else reporting an issue like this.
I don't remember the details - maybe was something on their network system.
Go to the main forum page and do a search ( search only works on main page for all content )

Larry
Title: Re: Mymidnite Stops data logging after 23:59
Post by: ClassicCrazy on January 22, 2020, 01:12:52 PM
One thing you could try to see if it is someway connected to Classic is to set Classic to reboot at midnight. Forget what the setting is - somewhere on mngp tweaks or on local app there is a checkbox in config .
Are you running the latest Classic Firmware ?

Larry
Title: Re: Mymidnite Stops data logging after 23:59
Post by: mcsarge on January 22, 2020, 03:52:45 PM
I had this same behavior, but it would start up again at midnight. I found that if I changed the IP address of my Classic from DHCP to Static, it stopped happening.

---Start geek speak---
1. You can enter a reservation in your network DHCP system for the IP address of the Classic, so it won't be given to another computer on the network.
2. Or you set the IP address of the Classic outside of the range of DHCP addresses your router grants. For instance, my router grants from 192.168.0.1-200, and so I set my classic's IP address as 192.168.0.225.

Matt
Title: Re: Mymidnite Stops data logging after 23:59
Post by: jacobtuft on July 20, 2020, 02:12:21 PM
MikeyB40, did you fix this? 

How did you fix it?

I'm curious if you tried the static IP address suggestion? 

My system is doing the same.

Thanks,

-Jacob