Hi all,
I was tweaking my Whizbang efficiency to match my Volthium LFP batteries and noted that 98% was too low on WBjr and Trimetric, so I set them both to 100% and SOC seems to be more accurate.
What WBjr numbers are you using on different LFP batteries?
100% seems too good to be true but...
Thanks,
Erik
I would love to hear what others say about their findings too...
Thanks for your information ! I knew that the Amp-Hour efficiency was higher for LFP than Lead Acid but, WoW !
boB
Hi boB,
Volthium told me to start with 98% efficiency, but after four/five cloudly days my Wbjr plus Trimetric were both off by 6%.
I set them to 100% yesterday and will check them for a week.
Another option would be to install a Cerbo gx from Victron to read the SOC directly from batteries. The Cerbo has two relays that could be used to start a gen on soc.
Simpliphi integration guides for Outback (fndc) talk about 98% efficiency but I would be curious to know real life numbers from different LFP users/brands.
A+,
Erik
I have my Battleborns set to 99% on my Victron shunt seems pretty close
Hi FNG,
Do you have a Victron BMV battery monitor?
Quote from: SolarMusher on April 11, 2022, 10:53:29 AM
Hi FNG,
Do you have a Victron BMV battery monitor?
I do yes