Continuous tweaking of AUX2 threshold for maximum PWM output

Started by cpfl, May 19, 2015, 07:17:52 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

cpfl

#15
July 04, 2015, 11:46:05 PM Last Edit: July 05, 2015, 12:03:30 AM by cpfl
Paul,

From my modified version of newmodbus :-

   xbattvolts     = modbus_register(4115);
   xtargetvolts   = modbus_register(4244);

The target voltage depends on the current mode (BULK,ABSORB,FLOAT,EQ) and on the battery temperature compensation parameters of the classic.

See you on the arduino side.

Chris.
Off-Grid in a 320 sqft tiny home (plus 320 sqft attached workshop) in Texas, USA: Midnite Solar Classic 150, Magnum Energy MS4448PAE, 9 x Kyocera KD240 (2160 watts) + 9 x Kyocera KU265 (2385 watts), 16 x GC2 (400AH 48V), Raspberry Pi (ethernet & RS485 monitoring).
Print
Go Up Pages 1 2
User actions