Silicon grease for electrical contact?

Started by sigp2101, February 26, 2016, 02:26:20 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

russ_drinkwater

#15
March 02, 2016, 04:01:32 PM
Ok, Yeah I know the one you mean. Normally a white compound.
I will wait until I get to a larger town or Kurt comes up at easter time, lol.
Might check the local garage as he may have something in stock.
Surprised me over the years what parts and gear they have on hand.
Thanks.
Standalone. 20 Hyundai x 220 watts panels, 2 x classic 150's, Latronics 24 volt 3kw inverter, Whiz bang Jnr, 12 Rolls surrete  4KS 25P  batteries and WBJ.
Grid tie feed-in, 12.5 kw in 3 arrays generating 50 kws per day average. Solar river grid tie inverters

BioPower

#16
May 07, 2016, 09:28:17 PM
In Australia Supercheap have a online shop and will post to you.
9.5 KW Solar Panels, 2 Midnite Classic 150, 8 KW self-built 8 KW Inverter,  5KW AC coupled grid tie Inverter, Exide 775AH @C5 48V forklift battery

CDN-VT

#17
May 07, 2016, 11:10:05 PM
Quote from: russ_drinkwater on March 02, 2016, 04:01:32 PM
Ok, Yeah I know the one you mean. Normally a white compound.
I will wait until I get to a larger town or Kurt comes up at easter time, lol.
Might check the local garage as he may have something in stock.
Surprised me over the years what parts and gear they have on hand.
Thanks.

White IN MY WORLD is for HEAT dissipation and a cloning of two surfaces & has contraction materials , while SDG or CLEAR Silicone Dielectric  Grease is NON contraction of elements ..
It's a @&%@ to clean up after & could cause sparks


VT
Canadian Solar 350W 37.6 VOC  30.6 VMP 8.22 ISC 7.87 IMP ,-15 c +30c max  4 strings in 2 in Series for 24v Classic 150 -1020 Ah  Freezers & fridges ~~~ Second Array same panels of 3sx3 parallel for 24 V Classic 150 -440 Ah Outback Barns & out blds.
48Vdc almost done,11Strings up of 3s11P same panels

russ_drinkwater

#18
May 14, 2016, 05:18:40 PM
Just an update. got some of the clear silicone dielectric grease and have used it on all terminals.
The dielectric grease Kurt bought up is an opque colour and I used it on my sons system to see if there is any difference.
It is a heavier grease and was supplied by exide batteries.
Standalone. 20 Hyundai x 220 watts panels, 2 x classic 150's, Latronics 24 volt 3kw inverter, Whiz bang Jnr, 12 Rolls surrete  4KS 25P  batteries and WBJ.
Grid tie feed-in, 12.5 kw in 3 arrays generating 50 kws per day average. Solar river grid tie inverters
Print
Go Up Pages 1 2
User actions