L App crashiing ---again

Started by Westbranch, February 02, 2016, 06:00:40 PM

Previous topic - Next topic

Westbranch

I used to have a few crashes when using the local app, till today..FW2074..  I seem to be getting them ONLY when trying to download for EXPORT.

Andrew, is this a new bug or am I just lucky?

PS I hope to do a swap out of the board that Ryan sent me, tonight after today's gorgeous sunshine goes away in about 20 minutes, behind our  3000 ' sun blocking  ridge...
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Resthome

Quote from: Westbranch on February 02, 2016, 06:00:40 PM
I used to have a few crashes when using the local app, till today..FW2074..  I seem to be getting them ONLY when trying to download for EXPORT.

Andrew, is this a new bug or am I just lucky?

PS I hope to do a swap out of the board that Ryan sent me, tonight after today's gorgeous sunshine goes away in about 20 minutes, behind our  3000 ' sun blocking  ridge...

WB   is the app actually crashing or are you taking about disconnects?
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

Westbranch

I have had both, mostly disconnects...

Sun gone, time to play technician....
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Resthome

Yeah, I wasn't counting on much hope for the network fixes at least the ones for the Local App.  And you see what I see although disconnects occur at other time but mostly if you are fooling around look at or exporting data from the Classic. And your version has the so called network fixes in it.   >:(
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

Resthome

Quote from: Westbranch on February 02, 2016, 06:12:20 PM
I have had both, mostly disconnects...

Sun gone, time to play technician....

Good luck with the board swap. If it's the top one it's pretty easy. Just have to work the pins off and back on.

Make sure to disconnect the Batteries.   ;D
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

Westbranch

The install went smoothly once I got the top pins aligned, the video only refers to the side ones.... ;)   ;D

Results??
well now I have FW V 2056 MNGP v2054 so I don't know if there is something changed there, that will be non compliant.  I thought it was going to be all loaded for 2074... shall see.

It used to be FW V.2074-NW2073-GP2054

Next to check my MM2 connection
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come