Local App DATA DISPLAY stopped working

Started by Westbranch, February 03, 2016, 03:43:17 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Westbranch

February 03, 2016, 03:43:17 PM Last Edit: February 03, 2016, 03:52:23 PM by Westbranch
Well I did a 'top' board replacement and a  FW upgrade to 2079 +MNGP yesterday.
I used the LA to make changes to the settings.  as it was after sundown  I did not use the Data/LIVE display function. 

Today it is BLANK   ?  Is this an issue because the CC top board thinks it is CL 27501 but the LA sees Cl 4592 as that is what I have to use for the LApp to work.... :o

ADD: and when the CC calls in on the Net  there is no acceptance from MM2 either....???
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Resthome

#1
February 03, 2016, 03:49:44 PM
Quote from: Westbranch on February 03, 2016, 03:43:17 PM
Well I did a 'top' board replacement and a  FW upgrade to 2079 +MNGP yesterday.
I used the LA to make changes to the settings.  as it was after sundown  I did not use the Data/LIVE display function. 

Today it is BLANK   ?  Is this an issue because the CC top board thinks it is CL 27501 but the LA sees Cl 4592 as that is what I have to use for the LApp to work.... :o

Check to see if if any of the Values to Chart are marked.
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA
Print
Go Up Pages1
User actions