Author Topic: Battery manufacturer's Data Sheets  (Read 36977 times)

Halfcrazy

  • Hero Member
  • *****
  • Posts: 2387
Battery manufacturer's Data Sheets
« on: September 06, 2011, 07:33:06 PM »
Lets post all our battery charging specs in this sticky

Ryan
« Last Edit: October 10, 2012, 01:07:47 PM by Halfcrazy »
Changing the way wind turbines operate one smoke filled box at a time

LGeist

  • Newby
  • *
  • Posts: 4
Re: Battery manufacturer's Data Sheets
« Reply #1 on: December 08, 2011, 06:06:38 PM »
This has some good info in it, thanks for sharing! The charger settings chart is pretty handy. I was reading through the SunXtender battery (sealed batteries by Concorder) manual today, this also has a lot of great info in it, link below.

http://www.sunxtender.com/pdfs/Sun_Xtender_Battery_Technical_Manual.pdf



niel

  • Sr. Member
  • ****
  • Posts: 453
Re: Battery manufacturer's Data Sheets
« Reply #2 on: December 08, 2011, 11:18:10 PM »
what i just noticed not too long ago on the concorde tech manual is that on page 23 is shows a design factor based on temperature and i saw that at 77 degrees f you still need to derate by 1.25. i thought all battery ratings were based at 77 degrees f, but not these. this leads me to believe the batteries are overrated by 25% for their ah specs. bums me out because i've always liked these batteries. :'(

Vic

  • Hero Member
  • *****
  • Posts: 2616
Re: Battery manufacturer's Data Sheets
« Reply #3 on: December 19, 2011, 09:20:13 PM »
If  anyone needs it,  Surrette data here:

https://www.rollsbattery.com/catalog/

Double click the Model number for the pdf Data Sheet.  FWIW,  Vic
« Last Edit: September 13, 2021, 04:29:53 PM by Vic »
Off Grid - Two systems -- 4 SW+ 5548s, Surrette 4KS25 1280 AH X2@48V, 11.1 KW STC PV, 3X MidNite Classic 150 w/ WBjrs, Beta KID on S-530s, MX-60s, MN Bkrs/Boxes.  Thanks MN for Great Products/Service/Support!

Vic

  • Hero Member
  • *****
  • Posts: 2616
Re: Battery manufacturer's Data Sheets
« Reply #4 on: September 21, 2012, 03:19:34 PM »
Recently,  Surrette Battery has created a "Solutions"  page that gives quick access to charger settings,  SOC vs Vbat tables,  etc.  Quick and helpful,  instead of wading throught Bulletin #s  etc:

http://support.rollsbattery.com/solution/categories

Also notice that they have been paring back on their Vfloat charger settings,  if anyone is interested.  Vic
Off Grid - Two systems -- 4 SW+ 5548s, Surrette 4KS25 1280 AH X2@48V, 11.1 KW STC PV, 3X MidNite Classic 150 w/ WBjrs, Beta KID on S-530s, MX-60s, MN Bkrs/Boxes.  Thanks MN for Great Products/Service/Support!

reddog

  • Newby
  • *
  • Posts: 20
Re: Battery manufacturer's Data Sheets
« Reply #5 on: September 26, 2012, 01:54:11 AM »
Hard to find, but I got Info on...DEKA GC15 batteries from MFG...recommended charge info (bulk/absorb/equalize) for GC15 6volt 230AH wet cells that lots of us use.

1. BULK STAGE = 30% of C20  (or 30% of 230Ah)
69 amps (max.current) per series string.
Multiple the 69 amps x the parallel strings, if applicable.

2. ABSORPTION STAGE = 2.40 - 2.45 vpc (x 3 cells) = 7.32 v  x the # of batteries in your string

3. FLOAT STAGE = 2.30 - 2.35 vpc (x 3 cells) = 6.96 v x ....................................

4. EQUALIZE STAGE = 2.50 x 2.55 vpc (x 3 cells) = 7.59 v  x ...............................

NOTE:  ***TEMPERATURE COEFFICIENT IS -3mV / Cell
Midnight Solar Classic 150
Xantrex C-35  (diversion)
Blue Sky 3024i (Spare)
2 Evergreen 12v 195 watt (Series)
2 Astronergy 24v 290w (Parallel)
Wind Blue 500w 3-phase a/c Turbine
Air-X 400w Turbine
8 Deka 6v 230AH batteries (920AH Bank)
Bogart Trimetric
AIRPAX sine wave 1800w Inverter

Halfcrazy

  • Hero Member
  • *****
  • Posts: 2387
« Last Edit: August 14, 2013, 01:41:33 PM by Halfcrazy »
Changing the way wind turbines operate one smoke filled box at a time

Vern Faulkner

  • Full Member
  • ***
  • Posts: 107
Re: Battery manufacturer's Data Sheets
« Reply #7 on: October 24, 2012, 06:08:59 PM »

Westbranch

  • Hero Member
  • *****
  • Posts: 2788
  • Building System (sort of) 1 weekend at a time
Re: C&D ... Battery manufacturer's Data Sheets ...>> C&DTechno
« Reply #8 on: November 24, 2012, 12:09:37 AM »
Note quite specs but a good in depth discussion on what one can use to customize a charge regime for  C&D AGM batteries

http://www.cdtechno.com/pdf/ref/41_2128_1199.pdf
« Last Edit: November 24, 2012, 12:11:08 AM by Westbranch »
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

dgd

  • Hero Member
  • *****
  • Posts: 1722
    • Lorylink
Re: Battery manufacturer's Data Sheets
« Reply #9 on: February 06, 2013, 07:29:17 PM »
Here is a link to charging info and discharge graphs for Champion Lithium Iron Phosphate Yttrium batteries. I am told these are available in Australia and New Zealand and most anywhere Champion brand batteries are available.

http://www.aasolar.co.nz/AA%20Solar%20Lithium%20Deep%20Cycle%20Batteries.html

dgd
Classic 250, 150,  20 140w, 6 250w PVs, 2Kw turbine, MN ac Clipper, Epanel/MNdc, Trace SW3024E (1997), Century 1050Ah 24V FLA (1999). Arduino power monitoring and web server.  Off grid since 4/2000
West Auckland, New Zealand

Resthome

  • Hero Member
  • *****
  • Posts: 1173
Solar One Battery Info
« Reply #10 on: March 14, 2013, 07:45:29 PM »
Solar One Batteries - http://proto.hupsolarone.com/
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

jp_le_gros

  • Newby
  • *
  • Posts: 7
Re: Battery manufacturer's Data Sheets
« Reply #11 on: March 14, 2013, 10:39:59 PM »
nobody there with US battery??
http://www.usbattery.com/usb_index.html
JP
off grid 2,8 kW solar, 0,6 kW wind, 1392 Ah 24 V bank, everything in construction

Halfcrazy

  • Hero Member
  • *****
  • Posts: 2387
Re: Battery manufacturer's Data Sheets
« Reply #12 on: April 25, 2014, 10:46:17 AM »
Changing the way wind turbines operate one smoke filled box at a time

tecnodave

  • Hero Member
  • *****
  • Posts: 752
  • Learn something new every day
Re: Battery manufacturer's Data Sheets
« Reply #13 on: June 05, 2014, 03:17:16 PM »
Found on www.rollsbattery.com/solutions

Rolls battery manual.pdf

Lots of good info in there , covers  UU and IUI charge profiles and lots more

td
#1 Classic 150 12 x Sharp NE-170, 2S6P, 24volt L-16 Rolls-Surette S-530, MS4024 & Cotek ,  C-40 dirv.cont. for hot water
#2 Classic 150 12 x Sharp NE-170, 2S6P, 24 volt L-16 Interstate,Brutus Inv.
#3 Kid/WBjr 4/6 Sanyo 200 watt multilayer 4/6 P
#4 Kid/WBjr 4/6 Sanyo 200 watt multilayer 2S 2/3 P

ChrisOlson

  • Full Member
  • ***
  • Posts: 157
Re: Battery manufacturer's Data Sheets
« Reply #14 on: June 09, 2014, 11:20:37 PM »
US Battery - all models of deep cycle flooded lead-acid and AGM:
http://www.usbattery.com/usb_images/charging_instruction_2011_3.pdf