Author Topic: Dynamic Current Limiting  (Read 2049 times)

WillEert

  • Full Member
  • ***
  • Posts: 119
Re: Dynamic Current Limiting
« Reply #30 on: March 11, 2017, 10:04:43 AM »
Thanks for your reply. I think that will work for my friend.

Will
24 ET 185 mono, Classic 150,8x Surrette 6CS25p, 3x Magnum 4448, homecooked diversion system
+ 15 Heliene 330 mono, Classic 150

unyalli

  • Jr. Member
  • **
  • Posts: 56
Re: Dynamic Current Limiting
« Reply #31 on: September 20, 2017, 04:54:42 PM »
Yes we have added that to the production firmware, I have also documented how to change it as well in this white paper:

http://kb1uas.com/MidNite/WhitePapers/Setting%20the%20WBjr%20current%20limit%20on%20the%20Classic.pdf

Sorry to dredge up and old post, everyone says search first so I did. Can't find this document. Looked all through the midnitesolar web documents also.

- Jeff
"Problems can not be fixed at the same level of awareness that created them" ~ Einstein

Vic

  • Hero Member
  • *****
  • Posts: 1736
Re: Dynamic Current Limiting
« Reply #32 on: September 20, 2017, 07:08:21 PM »
Hi Jeff,

At the foot of the first Post in the Linked Thread,  you should find that document:
http://midniteftp.com/forum/index.php?topic=3796.0

That Thread may have something of interest to you.

FWIW,   Vic
Off Grid - Two systems -- 4 SW+ 5548s, Surrette 4KS25 1280 AH X2@48V, 11.1 KW STC PV, 3X MidNite Classic 150 w/ WBjrs, Beta KID on S-530s, MX-60s, MN Bkrs/Boxes.  Thanks MN for Great Products/Service/Support!

unyalli

  • Jr. Member
  • **
  • Posts: 56
Re: Dynamic Current Limiting
« Reply #33 on: September 21, 2017, 02:52:05 PM »
Thanks Vic
"Problems can not be fixed at the same level of awareness that created them" ~ Einstein