MyMidnite Error Message

Started by Resthome, May 30, 2016, 02:23:46 PM

Previous topic - Next topic

Resthome

Andrew

Any idea why I am seeing these messages?

John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA

Westbranch

Well I can say you are one up on me!,....never had that one.... 
but on the positive side you are getting a response at leas,  All I get is 'no data try again''
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Resthome

Quote from: Westbranch on May 30, 2016, 04:59:58 PM
Well I can say you are one up on me!,....never had that one.... 
but on the positive side you are getting a response at leas,  All I get is 'no data try again''

At first all I had was data showing in the box on left that appeared to be correct but no graphs. Find out I did not have the correct entry in the Override entry. So I set that to 159.203.65.201 and got the graphs to plot. It however does not auto refresh the graphs when new data is available (and I have waited up to an hour). It I refresh the web page manually I get the new data added on to the graphs. But I am seeing this  error at least 3-4 time today, Have no idea what it is about.
John

10 x Kyocera KC140, Classic 150 w/WBJr, Link10 Battery Monitor, 850 AH @ 12v Solar One 2v cells, Xantrex PROwatt SW2000
Off Grid on Houseboat Lake Don Pedro, CA