Using SPD for 230 VAC European Installations

[WindFarmer]

Can any one direct me to any diagrams concerning using the SPD in a 230 VAC European configuration?

[CDN-VT]

Where are you thinking of adding this unit ? And what unit do you have ? AC or DC ?
Pick it here :http://www.midnitesolar.com/products.php?menuItem=products&productCat_ID=23&productCatName=Surge%20Protection%20Devices

VT

[WindFarmer]

I need information of how to wire the SPD to the AC side (230V 50Hz system) which has one Line, one Neutral and one Ground.

Thanks

Marc-Paul

[Halfcrazy]

red to hot
black to neutral
green to ground

is how I would do it, Red and black are interchangeable if so desired though

[CDN-VT]

Thats the same way I would do it .
No 90* wire bends , All sweeping curves from buss to the SPD .

VT

You do have one of these : MNSPD-300-AC

[TomW]

Thats the same way I would do it .
No 90* wire bends , All sweeping curves from buss to the SPD .

VT

You do have one of these : MNSPD-300-AC

Don't forget the shortest leads possible, as well.

T