Classic lite communication with Outback Mate3

Started by Alex, November 04, 2016, 11:29:22 PM

Previous topic - Next topic

Alex

Hello:

I have a Gridtie hybrid inverter with battery backup installed at my property.  Is a PV array 3300 watts (2 parallel string of 6 Solar panels in series) with a Midnite Classic Lite 250 in a 4048A Radian Outback Inverter and small battery bank (106AH).  There a way to communicate the Midnite Classic Lite 250 with the MATE3 in the Radian?  Right know i can't see my solar production, If there a way to see it or I need to change the Charge controller?

Thanks

CDN-VT

Canadian Solar 350W 37.6 VOC  30.6 VMP 8.22 ISC 7.87 IMP ,-15 c +30c max  4 strings in 2 in Series for 24v Classic 150 -1020 Ah  Freezers & fridges ~~~ Second Array same panels of 3sx3 parallel for 24 V Classic 150 -440 Ah Outback Barns & out blds.
48Vdc almost done,11Strings up of 3s11P same panels

Halfcrazy

or install an FNDC and a dedicated shunt for the charge controller only, then you can see that channel on the Mate3
Changing the way wind turbines operate one smoke filled box at a time