Author Topic: Shunt  (Read 265 times)

grizzley

  • Newby
  • *
  • Posts: 17
Shunt
« on: May 11, 2017, 11:57:17 AM »
Hi,
I am looking for some guidance in regards to buying the right shunt.  I have an off grid system with two Classic charge controllers and would like to upgrade my shunt so I can also use the Wizbang Jr to further improve my Classics ability to charge the system.  Maybe I overlooked it but I could not find any information as to how to choose the right shunt.  Can someone enlighten me?

I have a 48V 420AH battery bank
2 Classic 200 controllers
2 Magnum MS-PAE 4448 inverters

Thank you

WizBandit

  • Jr. Member
  • **
  • Posts: 58
  • Senior Technical Support Engineer for Midnite
    • HOME
2x 3Kw on Trailers & 2x 1.44Kw ThinFilm on Trailers
2.16Kw roof mounted (11,040 watts total)
(4) Classic 200, (2) Classic 150
(2) MidNite B17-5 6Kw Inverter Systems
Iron Edison NiFe 48V Battery

grizzley

  • Newby
  • *
  • Posts: 17
Re: Shunt
« Reply #2 on: May 11, 2017, 01:56:17 PM »
Thank you

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 1449
Re: Shunt
« Reply #3 on: May 11, 2017, 09:46:06 PM »
Or this one - same as midnite one
https://www.solar-electric.com/mkb-500-50.html

Larry
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie