Classic software information

Started by asdex, August 12, 2017, 03:03:40 AM

Previous topic - Next topic

asdex

Hi, not sure if this is the right section for this but could someone please explain the various values in the screenshot? Mainly the kWh and watts and which is which. eg which one is usage?
Thanks,

6 x JA Solar 320w solar panels facing NW, 4 x 300w panels facing North.
12 x 2volt Narada lead carbon batteries (24v 400ah), Classic and WBJr, Epever 50A controller, Outback FX2024 inverter and Mate, Trimetric monitor, Alibaba solar pump.

dapsyra

The KWh is the total energy harvest for that day while the W is the peak instantaneous power produced by the solar panels.  Both values indicate production not usage.
PV-OUTPUT: http://pvoutput.org/list.jsp?userid=46221
Midnite Classic 150/WBJr., 21 Roysolar 300Wp, 55V/400AH Lithium Titanate Oxide (LTO) Battery, Mercury MC5048E 5KVA Inverter

ClassicCrazy

If you have a Whizbang hooked up there is a  screen that shows SOC and the amount of net amp hours . There is also one that shows actual power being used which you can toggle between amps and watts.

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable