Author Topic: Midnite Kid Heating  (Read 226 times)

CDN-VT

  • Hero Member
  • *****
  • Posts: 788
  • Thats a C/V-107 pulling a barge on candled ice. ^
Re: Midnite Kid Heating
« Reply #15 on: January 04, 2018, 10:13:04 PM »
There is a process for doing factory restore - see this video.
Since you are stuck in the upload screen not sure if this would work but you could maybe try holding the buttons Ryan says.
http://www.midnitesolar.com/pages/kid/kid_video_play.php?video_ID=110&videoCat_ID=20

I would still get the cable plugged in , then plug it in your computer and see if the computer is in communication with the Kid and if it will upload the firmware . First do the process described in firmware update to make sure your computer is ready and have the firmware file ready to drag in if all goes well.

Might be worth opening a ticket with Midnite to ask them what you should do also.

Larry


https://www.youtube.com/watch?v=87-qphPCulE



VT
« Last Edit: January 05, 2018, 11:45:40 PM by CDN-VT »
Canadian Solar 350W 37.6 VOC  30.6 VMP 8.22 ISC 7.87 IMP ,-15 c +30c max  4 strings in 2 in Series for 24v Classic 150 -1020 Ah  Freezers & fridges ~~~ Second Array same panels of 3sx3 parallel for 24 V Classic 150 -440 Ah Outback Barns & out blds.
48Vdc almost done.

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 1512
Re: Midnite Kid Heating
« Reply #16 on: January 04, 2018, 10:28:06 PM »
I saw Ryan at energy fair this summer. He is over at Magnum inverters now.
Larry
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie

namilukol

  • Newby
  • *
  • Posts: 8
Re: Midnite Kid Heating
« Reply #17 on: January 05, 2018, 08:41:42 AM »
Thanks Larry and All for your help. The Kid is now ok after restoring and updating firmware.

Regards

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 1512
Re: Midnite Kid Heating
« Reply #18 on: January 08, 2018, 06:12:05 PM »
great - thanks for letting us know it worked out .

Larry
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie