Author Topic: Setting up My Midnite  (Read 736 times)

krementz

  • Jr. Member
  • **
  • Posts: 49
Setting up My Midnite
« on: January 03, 2018, 05:24:15 PM »
I have two Classic 150s. Today I got them working via the Local App. Each has an Ethernet cable to the router, DHCP addresses, and both show up in Local App. Both are on Firmware 2126.

I tried to set up My Midnite. I have the first one communicating fine. Trying to set up the second, when I go to Net menu to get the MAC and ID numbers, both are all zero.

What is happening?
Way off grid
Old system: Outback 2524, 1200 W PV,  installed 2005, 384 amp hours
New System: 2 SMA 6048 with 2 Midnite Solar Classic 150 controllers, 5500 W PV, 1700 amp hours

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 1802
Re: Setting up My Midnite
« Reply #1 on: January 03, 2018, 06:33:27 PM »
Is the second Classic in Follow Me mode ?

Are you looking at the mac and network address on the MNGP ?

Larry
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie

krementz

  • Jr. Member
  • **
  • Posts: 49
Re: Setting up My Midnite
« Reply #2 on: January 03, 2018, 06:54:06 PM »
The two Classics are controlled by the SMA inverters. My understanding is Follow Me mode is disabled when in SMA Mode.

I am looking at the addresses on the MNGP. Classic #1 had the numbers, so I was able to connect. Classic #2 only shows zeros.
Way off grid
Old system: Outback 2524, 1200 W PV,  installed 2005, 384 amp hours
New System: 2 SMA 6048 with 2 Midnite Solar Classic 150 controllers, 5500 W PV, 1700 amp hours

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 1802
Re: Setting up My Midnite
« Reply #3 on: January 03, 2018, 07:37:11 PM »
What happens if you connect with the Local Status App ? Can you see the data on both of the Classics

On MNGP when you go to NET menus  the third screen has Web Access:   Is this enabled ?

Larry

system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie