My MidNite Down?

Started by Matrix, March 01, 2018, 09:08:43 PM

Previous topic - Next topic

FNG

I am told that it is not really any worse than it was after the crash but I have passed this link to engineering to get some input

off-grid-geeks

It is back up right now and correctly displaying data.

Westbranch

I am thinking it is a gateway time out issue as the pattern of what one has to do is almost identical each time.... that little dial spins and  spins .... and gives one of 3 results, ALL data, some data or no data
the 'some data ' can be a truncated piece of what you have already seen and that is most annoying when you refresh and get less!
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Matrix

I have gotten nothing all day except the timed out message. My Midnite is not working at all for me.
Grid-Assist Off-Grid
REC TwinPeak 2 285W 3S-3P 2565w-STC 1926w-NMOT Array / Classic 150 / Conext SW 4024 Inverter
Trojan L16H-AC 435Ah bank 4S  with 7' of 4/0 cable
24 volt system /  Need 3200Whs Daily
My System Install

Matrix

This is all I have gotten all day.

Grid-Assist Off-Grid
REC TwinPeak 2 285W 3S-3P 2565w-STC 1926w-NMOT Array / Classic 150 / Conext SW 4024 Inverter
Trojan L16H-AC 435Ah bank 4S  with 7' of 4/0 cable
24 volt system /  Need 3200Whs Daily
My System Install

Westbranch

Did you send in an email to the webmaster as stated in the AJAX error message  or Kyle?
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

KyleM

The 500 (internal server error) means something went wrong on the server's side.

This is a very generic error the only good thing from the customer perspective is that this error is always a server side problem.

In this case it is a latency issue. There is a massive amount of data being pushed through our servers and we are having troubles keeping up.

We have our team working on the issue and I know you are all tired of hearing this but the only thing we can do is wait for the team to get it working.

Sorry

Matrix

Thanks no problem. Working today. It's never a deal-breaker for me, just thought Midnite solar might want to know.
Grid-Assist Off-Grid
REC TwinPeak 2 285W 3S-3P 2565w-STC 1926w-NMOT Array / Classic 150 / Conext SW 4024 Inverter
Trojan L16H-AC 435Ah bank 4S  with 7' of 4/0 cable
24 volt system /  Need 3200Whs Daily
My System Install