Author Topic: The Limits Setting - In the Local App  (Read 131 times)

Matrix

  • Sr. Member
  • ****
  • Posts: 280
Re: The Limits Setting - In the Local App
« Reply #15 on: May 16, 2018, 07:40:18 AM »
Thanks,  I thought the safty part of the code required the DC and the AC to be shut down.  I do have a meter as part of my house (Air/Heat, Washer, Dryer) are all on grid,  but the rest of my house is not.  If fire department pulled my meter, most of my house wiring would stay live as the batteries would still be connected to the inverter. 

So some how i would need to have some kind of switch to trigger the SOB as I think I see that it shuts down the array when the transmitter side of the SOB sense no DC power? 
Grid-Assist Off-Grid
REC TwinPeak 2 285W 3S-3P 2565w-STC 1926w-NMOT Array / Classic 150 / Conext SW 4024 Inverter
Trojan L16H-AC 435Ah bank 4S  with 10' of 4/0 cable
24 volt system /  Need 3200Whs Daily
My System Install