Author Topic: Battery tilt  (Read 695 times)

DEinME

  • Newby
  • *
  • Posts: 21
Re: Battery tilt
« Reply #30 on: August 12, 2018, 04:32:12 PM »
You might have to cycle those new batteries deep (  50% ?)  a couple times before they start acting properly like you would expect a deep cycle battery to.

Larry
From the Trojan Industrial Line User's Guide: "Trojan batteries take 50 - 100 cycles to work up to providing full amp-hour capacity."
4800W PV in 2 circuits of 96V & 50A each after the Midnight combiner. Two Midnight Classic 200. MagnaSine 4448 split phase inverter on a Midnight e-panel. 700Ah or 900Ah FLA @ 48V. Birdhouse,WBjr, etc. Replaces 16-year-old off-grid full-time 408W PV & 300W Morningstar inverter.

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 1926
Re: Battery tilt
« Reply #31 on: August 13, 2018, 01:57:46 AM »
There is a lot of info on how to hook up and test the stuff on the knowledge base ( I only found out about this recently)
http://www.midniteftp.com/support/kb/index.php
Larry

Hi Larry,

Thanks for reminding me of the Knowledge Base   ...   this is a great addition to the Forum.

73,   Vic

Yeah I like it ! Saves us a lot of explaining doesn't it !

Larry
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie

Vic

  • Hero Member
  • *****
  • Posts: 2036
Re: Battery tilt
« Reply #32 on: October 29, 2018, 08:17:12 PM »
Hi DEinME,

Am curious how those new Trojan IND batteries are doing.

Are  you able to achieve full-charge,  measured SGs,   using the standard Absorb voltage?

Any other observations on these batteries?

Thanks,   Vic
Off Grid - Two systems -- 4 SW+ 5548s, Surrette 4KS25 1280 AH X2@48V, 11.1 KW STC PV, 3X MidNite Classic 150 w/ WBjrs, Beta KID on S-530s, MX-60s, MN Bkrs/Boxes.  Thanks MN for Great Products/Service/Support!