Author Topic: 3600Watt Solar for Printshop in Chad, Africa  (Read 314 times)

psweber

  • Newby
  • *
  • Posts: 3
  • Mission maintenance technician
3600Watt Solar for Printshop in Chad, Africa
« on: February 28, 2019, 05:24:14 AM »
This system started out as a split phase system and is now fully 3phase to run all the printing equipment including paper cutter, folder and presses.  It has almost 1500Ah @ 24v of Hoppecke gel batteries. 3 Outback VFX3024Jseries inverters and 2 Midnite Classic 200 controllers splitting the array into 2x 1800watts. (2a,7s,3p @65w) and a SouthWest 1824 Solar Chill cooler to keep the heat under control (<30C) during our hot season with 45+ daily ambiant.
There is a 34Kw Cummins that used to run 8hrs a day but now only 1hr for pumping water for the rest of the property.
Print Shop system: Panels 2x21x65w 3780W, 2x Midnite Classic 200 controllers, 3phase Outback VFX3024Jspec inverters, 24x 6-OPzV batteries - 1470Ah@24V.
House system: Panels 6x180w 1080W - Classic 150, 12x60w - Kid, Trace DR1512, 12x 6-OPzV batteries - 1470Ah@12V

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 2169
Re: 3600Watt Solar for Printshop in Chad, Africa
« Reply #1 on: February 28, 2019, 12:13:40 PM »
Nice install !

Larry
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie