My new Classic 200 - Log data/webserver and Arc Fault

Started by DanTheDane, March 13, 2019, 09:49:28 AM

Previous topic - Next topic

DanTheDane

Hi,


I'm the new happy owner of a Midnite Classic 200 charge controler. I'm building a hybrid system of a 2kw wind turbine and a 1.2kw solar array. 1 Midnite for solar and 1 for the wind turbine(s)

My questions are:

1. Regarding data log'ing and how you usually get access to these data from the internet. Would you please point me in the right direction. Do you use e.g. a Raspberry Pi/Webserver or do I have to get a Midnite accessory to be able to do this?

2. Arc Fault/Protection etc, I suppose you'll have to connect a dumpload per phase anyway?

Thanks in advance,

KR,
Dan

Westbranch

3 ways to connect and view your data
1Use MidNites Local App, download and needs Adobe Air also.... download from here   www.midnitesolar.com

2 Use My MidNite 2 download from here   www.midnitesolar.com

3 use Grahams Android App .... try this link, it should get you started...http://midniteftp.com/forum/index.php?topic=1589.msg38767#msg38767
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

ClassicCrazy

Graham is also working on some other Classic monitoring projects that make it easier to access info across the internet without having to open ports and stuff like that .
http://midniteftp.com/forum/index.php?board=34.0
Take a look here for more info on wind chargers info .
http://www.windsine.org/

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

binkino

Quote from: DanTheDane on March 13, 2019, 09:49:28 AM
1. Regarding data log'ing and how you usually get access to these data from the internet. Would you please point me in the right direction. Do you use e.g. a Raspberry Pi/Webserver or do I have to get a Midnite accessory to be able to do this?

Quote from: Westbranch on March 13, 2019, 01:52:08 PM
3 ways to connect and view your data
1Use MidNites Local App, download and needs Adobe Air also.... download from here   www.midnitesolar.com

2 Use My MidNite 2 download from here   www.midnitesolar.com

3 use Grahams Android App .... try this link, it should get you started...http://midniteftp.com/forum/index.php?topic=1589.msg38767#msg38767

4th ... http://midniteftp.com/forum/index.php?topic=3875.msg39590#msg39590
PV-OUTPUT: http://pvoutput.org/list.jsp?id=38617
Classic Lite 200 + Classic 200 + Easun ISolar-SMX-II-5.6KW + 12x240Wp + 12x255Wp + 2x10kWh LFP
http://a68k.de/Solar/Monitor_LC2.php

Westbranch

thanks Binkino, forgot  ::) about that  one as I don't rPi yet  :-[
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come