Author Topic: MNPV8HV-DISCO-3R-PSB  (Read 624 times)

KyleM

  • Administrator
  • Full Member
  • *****
  • Posts: 142
MNPV8HV-DISCO-3R-PSB
« on: March 21, 2019, 04:33:15 PM »
This unit was repaired by our service department and verified working

The Ugly One

  • Newby
  • *
  • Posts: 17
Re: MNPV8HV-DISCO-3R-PSB
« Reply #1 on: January 28, 2020, 12:10:06 PM »
?? What's the info for this unit?

FNG

  • Administrator
  • Full Member
  • *****
  • Posts: 236
Re: MNPV8HV-DISCO-3R-PSB
« Reply #2 on: January 28, 2020, 02:36:07 PM »
The MNPV8HV-DISCO 3R's red handled is LOCKABLE IN THE OFF POSITION!

    Convertible configuration (field configurable)
    Eight strings combined for up to 160 Amps single 230 Amp/600V single pole disconnect)
    4 + 4 positive strings, separate PV+ and PV- for use with 2 inverters (2 pole 115 Amp disconnect)
    Four strings positive, four strings minus for use with non-isolated inverters (2 pole 115 Amp disconnect)
    Disconnect has built in shunt trip with positive feedback
    Birdhouse compatible
    Load Break Rated
    Optional PV connected power supply
    Optional AC connected power supply for redundancy
    Type 3R aluminum enclosure (no rust, won't turn to dust)
    90o C connections
    See thru deadfront & color coded busbar guards included
    Fuseholders (MNTS) installed
    15a/600v fuses installed
    600 volt max
    Meets 2014 NEC 690.12
    Warranty - 5 yrs.
    Listed by ETL for US & Canada
    Made in the USA

Hardware Includes:

    One MNSPD-600 (Surge Protection Device)
    Eight 1/2" strain reliefs (MNSR-1000)
    Eight 1/2" LOCKNUTS
    One 10-32 X 7/8" BOLT
    Two 10-32 X 3/8" FHP
    Six 10-32 KEPS NUT
    One TERMINAL PIN 18-22 AWG.
    One TERMINAL PIN 10-12 AWG.
    Two RING TERMINAL 10-12 AWG.
    One BUSBAR, NEGATIVE OUT 2
    One BUSBAR, POSITIVE OUT 2
    One BLUE WRENCH

FNG

  • Administrator
  • Full Member
  • *****
  • Posts: 236
Re: MNPV8HV-DISCO-3R-PSB
« Reply #3 on: January 28, 2020, 02:36:25 PM »
Asking $400