Local App conflict with settings??

Started by Westbranch, September 03, 2019, 04:22:21 PM

Previous topic - Next topic

Westbranch

I wanted to make a simple change to the End Amps for the fall/winter period  so tried to use the Local ampp and it says "UNKNOWN'' with the IP address correctly ID'd,  and a RETRYING message . had to close and reopn to get it to change but all I get is same  as before..??
I don't remember if I have used the LA since we changed  the ISP. we now have a STATIC IP from him.... I am wondering if that is part of the problem ?  Yet the MyMidnite works flawlessly since the change...,
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Vic

Hi Wb,

Here,   we need to re-boot the WiFi Extender about every three months,  when the Classic is not connected,   or it takes many,   many attempts to establish the connection.   This is when another device connected to that Extender,   works fine   ...

So,  it might be worthwhile rebooting  whatever hardware that is connected to the Classic EtherNet port.

Just a random thought,   from someone that knows very little about Networks,   FWIW,    Vic
Off Grid - Sys 1: 2ea SW+ 5548, Surrette 4KS25 1280 AH, 5.25 KW PV, Classic 150,WB, Beta Barcelona, Beta KID
Sys 2: SW+ 5548s, 4KS25s, 5.88 KW PV, 2 ea. Classic 150, WB, HB CC-needs remote Monitoring/Control, site=remote.
 MN Bkrs/Bxs/Combiners. Thanks MN for Great Products/Svc/Support&This Forum!!

Westbranch

thanks Vic, had thought  about those sort of things , and discounted them as the MM2 was  working fine last week (except for a few days when the  Tech's were working on a bug) as was  the Android APP , by Graham, also works.

I wondered if it was having a fixed IP on the router and again specified by the Classic settings?

The Classic is hard wired to the router and has a ' Switch '  to boost the signal strength in 100 feet of Cat 7 wire. 

Back on site on Friday and I can start checking ...

E
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

ClassicCrazy

If my Local App ever gets problems - not too often - but if it does I just switch DHCP back on and then let it find an address and if I want can then make that one static.  The Local App should find the new ip address.
There is also a new Windows signing message that I get every time I open Local Status app that I have to close everything time and then it works fine. 

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable