Author Topic: RS232 data  (Read 1613 times)

FNG

  • Administrator
  • Sr. Member
  • *****
  • Posts: 266
Re: RS232 data
« Reply #15 on: January 29, 2020, 03:20:08 PM »
Ok so would you agree that the battery is 24.8v and the PV is 26.3v

As for wattage I will have to look into that. What do you think the kid was doing for watts at the time of that stamp?

And yes 6 will be no good with no BTS, 8&9 also will be default with no WBjr

As for 10 I am trying to get a list of these now

rayclark

  • Newby
  • *
  • Posts: 8
Re: RS232 data
« Reply #16 on: January 29, 2020, 03:32:14 PM »
Our network switch says we are drawing on average 1.3 amps at 27.2 volts so I would expect around 35.36 watts.

Nomad1

  • Newby
  • *
  • Posts: 22
Re: RS232 data
« Reply #17 on: February 23, 2020, 02:45:56 AM »
@rayclark
I'd suggest you to look at my previous repository containing some data decoding attempts:
https://github.com/Nomad1/KIDStats

P.S. Note that there is firmware version lurking somewhere that contains complete garbage instead of data. I don't remember it's number, it could be 1863 or something alike.
Programmer

Crashflow

  • Newby
  • *
  • Posts: 2
Re: RS232 data
« Reply #18 on: August 26, 2020, 10:39:37 AM »
Any more info on this? I'm preparing to do the same - get data out of the Kid.