Author Topic: Classic SL Remote Control  (Read 1003 times)

Glenn

  • Newby
  • *
  • Posts: 2
Classic SL Remote Control
« on: January 20, 2020, 12:07:21 PM »
Originally left the remote controller cradled to the controller. Now I  want to relocate it. Please tell me about the wire I need to use.
Thank you.
Glenn

FNG

  • Administrator
  • Sr. Member
  • *****
  • Posts: 387
Re: Classic SL Remote Control
« Reply #1 on: January 20, 2020, 01:25:01 PM »
Glen,
I would use a wire similiar to cat5 cable and crimp the 6 conductor phone jacks on if you need to go more than say 10 feet. The manual shows the pinout but it is Pin 1 on one end goes to pin6 on the other so a mirror image

Glenn

  • Newby
  • *
  • Posts: 2
Re: Classic SL Remote Control
« Reply #2 on: January 21, 2020, 10:08:26 AM »
Admin,
Thank you. I did not see the pin out in the manual. I’ll look again.
Glenn

FNG

  • Administrator
  • Sr. Member
  • *****
  • Posts: 387
Re: Classic SL Remote Control
« Reply #3 on: January 21, 2020, 10:19:07 AM »
This document, even though it is for follow me, shows the cable and pin out