Local app working on pc but not on laptop through wifi

Started by tmkelly1, February 02, 2020, 12:15:23 PM

Previous topic - Next topic

tmkelly1

The videos were a great help in setting up the local app and creating the ip address' to work. I'm hard wired to the wireless router with both my pc and the classic 150's (2), and it all worked well. But my laptop which is on the wifi doesn't see the 150's on the local app.
I can log into the router and see them as clients, but the local app remains blank on the laptop.
Any suggestions?



ClassicCrazy

Do you have the classics as dhcp or static ?
You can only have one thing logged in to  classic at a time.  Is there another computer logged in on Local App ?  Or an android ?

Make sure everything else is logged off .
Go into Local Status App on your wireless computer and the configure settings and try checking and unchecking the auto discover Classics or try putting in the ip address you see on router.

Just some things to try

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

tmkelly1

thanks,
only one device at a time, laptop just doesn't seem to get it.
but I'll try those ideas, thanks

mike90045

#3
Odd.  I have my classic 200, set to a fixed IP, wired to a wifi router.  My win 8 Laptop is 300feet away, and I have the LA set to look at the fixed IP.  Been working fine since first set up.   Also can access it via LA on android phone in the power shed, via wifi, works fine there too.   

  LA will only work with 1 master device, so start with no computer connected to it, limited to 1 computer/android phone
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV

ClassicCrazy

Quote from: tmkelly1 on February 28, 2020, 05:54:41 PM
thanks,
only one device at a time, laptop just doesn't seem to get it.
but I'll try those ideas, thanks

Maybe try uninstalling the Local App and reinstall it again.

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

KyleM

The Classic piggybacks off port 80 which is a port normally used in browsing web pages.

If you have your laptop antivirus settings set to high security, it might be blocking the Classic's signal.   

If you are in a place that is secure, try turning your security preferences to the minimum choice and try again.


-Kyle