Author Topic: Count down of Absorb  (Read 102 times)

reluctantoffgridder

  • Newby
  • *
  • Posts: 1
Count down of Absorb
« on: February 07, 2020, 03:16:29 PM »
Does anyone know where to look for the time remaining in a Classic 150's Absorb cycle? I don't have them hooked up to the ethernet as yet.

Thanks!

boB

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3119
Re: Count down of Absorb
« Reply #1 on: February 07, 2020, 03:59:13 PM »
In the TIME menu, look for the soft-right key  (top-right button) and on the lower right corner of the LCD it should say  VIEW...

That should show you the timers and their remaining time counting down.

You can then press another button  (soft left ?)  to switch between hours:minutes    and  minutes:seconds..

The seconds is nice because you can see it counting down once per second.   If the Classic happens to go back to BULK, the seconds will stop and pause there.

K7IQ

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 2317
Re: Count down of Absorb
« Reply #2 on: February 07, 2020, 08:06:48 PM »
When you get your Classic connected to a router if you have an Android try out Graham's Classic Monitoring app . There is a screen where it shows all the timers and temp compensated charge point so easy to see what is going on. 

Larry
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie