Author Topic: Local App/ MyMidnite for Classsic 250 and Sunny Island web connectivity  (Read 448 times)

EricSmith

  • Newby
  • *
  • Posts: 2
    • MOBILE SOLAR POWER
I sure this toppic has come up but can't find a lot of information I assume I will have to use a combination of a few things to get Remote monitoring like Sunnybox or "Mate 3S/Optics" funtionality. my question is how do I configure this system.
Do I make a local netwrok and use a
-MIDNITE, MNSICOMM, CLASSIC MODBUS TO SUNNY ISLAND CANBUS COMMUNICATIONS ADAPTER?
-https://www.midnitesolar.com/pdfs/Local_App_manual.pdf
and/or
somthing with this raspberry PI https://www.youtube.com/watch?v=JdV4x925au0&t=3s
Thank you
Eric
KK6ATC

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 2665
Re: Local App/ MyMidnite for Classsic 250 and Sunny Island web connectivity
« Reply #1 on: February 28, 2020, 11:15:15 PM »
You can use a Raspberry Pi with Node Red to do all kinds of things -if you have the geek and programming smarts to grab the data from all your devices and then display them like Andreas Speiss shows in his video.

For remote monitoring the Classic you may be interested  in this recent project
http://midniteftp.com/forum/index.php?topic=4817.0

Larry
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie