« previous next »
Pages: 1 ... 5 6 [7]

Author Topic: CCDM - Charge Controller Data Manager  (Read 2914 times)

Fort Wisers

  • Jr. Member
  • **
  • Posts: 43
Re: CCDM - Charge Controller Data Manager
« Reply #90 on: January 19, 2021, 02:25:26 AM »
Quote from: ClassicCrazy on January 18, 2021, 02:56:53 PM
Brent - Midnite has Classic Firmware 2193 on their webpage but Bob had put out another one that got rid of an annoying tone if you were using the voice options. Not sure if they incorporated that fix into 2193 or not. But this is the firmware I am using 2245 - look here http://midniteftp.com/forum/index.php?topic=4212.msg41349#msg41349

Larry

Thanks Larry, I appreciate your insight on this one.
Take care:
Brent
Logged
Cabin#1 System: 2 x Hanwha QCell 370watt, Classic 200 incl. wbjr, 2 x Rolls FLA 6V, Kisae SW1220 Inverter

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 2843
Re: CCDM - Charge Controller Data Manager
« Reply #91 on: January 26, 2021, 02:17:24 AM »
Brent
You should have this discussion  moved to the open source section of the forums .
You might be interested in this that was posted on  a discussion there. It tells how to go about making an IOT Stack container for docker
https://gist.github.com/Paraphraser/378d17e759901d4871e5be4327e3f3c8

Larry
Logged
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie

Fort Wisers

  • Jr. Member
  • **
  • Posts: 43
Re: CCDM - Charge Controller Data Manager
« Reply #92 on: January 27, 2021, 08:26:44 AM »
Quote from: ClassicCrazy on January 26, 2021, 02:17:24 AM
Brent
You should have this discussion  moved to the open source section of the forums .
You might be interested in this that was posted on  a discussion there. It tells how to go about making an IOT Stack container for docker
https://gist.github.com/Paraphraser/378d17e759901d4871e5be4327e3f3c8

Larry

Hey Larry!
I shall check out the link sometime soon hopefully. Things got a little busy on this end with the kids transitioning from virtual school to back to school so everything else went on hold.
Good idea about moving this to the Open Source section, to be honest I didn't even realize the forum had a dedicated section but will check it out as well, as time permits.
Take care:
Brent
Logged
Cabin#1 System: 2 x Hanwha QCell 370watt, Classic 200 incl. wbjr, 2 x Rolls FLA 6V, Kisae SW1220 Inverter

ClassicCrazy

  • Hero Member
  • *****
  • Posts: 2843
Re: CCDM - Charge Controller Data Manager
« Reply #93 on: January 27, 2021, 07:05:08 PM »
Quote from: Fort Wisers on January 27, 2021, 08:26:44 AM
Quote from: ClassicCrazy on January 26, 2021, 02:17:24 AM
Brent
You should have this discussion  moved to the open source section of the forums .
You might be interested in this that was posted on  a discussion there. It tells how to go about making an IOT Stack container for docker
https://gist.github.com/Paraphraser/378d17e759901d4871e5be4327e3f3c8

Larry

Hey Larry!
I shall check out the link sometime soon hopefully. Things got a little busy on this end with the kids transitioning from virtual school to back to school so everything else went on hold.
Good idea about moving this to the Open Source section, to be honest I didn't even realize the forum had a dedicated section but will check it out as well, as time permits.
Take care:
Brent

No problems or hurry. I understand the too busy with things !

Larry
Logged
system one
Classic 150 , 5s4p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system two
Classic 150 ,5s 135 watt Kyocero , 16s Calb 100AH LiFePO4 , Outback VFX 3648 inverter
system three
Midnite KID MPPT 24 DC in to  12 volt AGM batterie

Fort Wisers

  • Jr. Member
  • **
  • Posts: 43
Re: CCDM - Charge Controller Data Manager
« Reply #94 on: February 05, 2021, 12:15:20 PM »
Moderators -> Could you move this entire thread to the Open Source section of the forum (as per Larry's suggestion).

Larry and Mike (and anyone else following) -> I hope to post "0.0.2 - beta" by the end of Feb.
Nothing too serious in terms of updates, just a number of the small additions / tweaks we've discussed so far
Logged
Cabin#1 System: 2 x Hanwha QCell 370watt, Classic 200 incl. wbjr, 2 x Rolls FLA 6V, Kisae SW1220 Inverter

FNG

  • Administrator
  • Sr. Member
  • *****
  • Posts: 307
Re: CCDM - Charge Controller Data Manager
« Reply #95 on: February 06, 2021, 06:58:22 AM »
Moved
Logged

Fort Wisers

  • Jr. Member
  • **
  • Posts: 43
Re: CCDM - Charge Controller Data Manager
« Reply #96 on: February 06, 2021, 07:16:44 AM »
Quote from: FNG on February 06, 2021, 06:58:22 AM
Moved
Thank you!
Have a great weekend:
Brent
Logged
Cabin#1 System: 2 x Hanwha QCell 370watt, Classic 200 incl. wbjr, 2 x Rolls FLA 6V, Kisae SW1220 Inverter
Pages: 1 ... 5 6 [7]
« previous next »