latest firmware bricked my two classic 150s

[jtdiesel65]

Ok I will try that. The local status app works for both, so I would think cabling would be ok.

[jtdiesel65]

I switched the cables at ~2:15 EST.
thx

[KyleM]

Still not seeing any communication.   
The Local App is connecting? Please go into the Local App for this Classic-   Go to the Config Tab on the top and then Tech on the bottom.
Please verify that Web Access is Enabled here. MODBUS port should be 502
Use the return button to write this info to the Classic I will keep an eye on the server to look for updates.

-Kyle

[jtdiesel65]

The local app shows it's enabled, port 502. I hit the return.
thx

[KyleM]

Still no communication

Lets try one more thing:
On the Classic:
1- press Main menu
2- scroll to tweaks and press enter
3- press the upper right button "More" 1 time
4- Hold the left arrow and tap the upper right button 2 times (Should be a screen that says Address and Value)
5- On the bottom right of the screen make sure it says HEX. (If it says DEC press the button right under it once)
6- Use the up and down triangle buttons to get to 20481  the Value should read 000A  can you please confirm you see this?
-Kyle

[jtdiesel65]

20481 is A8C0

[KyleM]

I see no other option but to have us take a look at it and try to find a solution.

Thanks for your patience.
Please send me your  personal info ( Name -Shipping address- phone number)  in an email to KyleM@midnitesolar.com and I will set up an RMA for you.

Thanks,
Kyle

[jtdiesel65]

OK, thanks. I'll send an email.