Author Topic: 10,000 Watt B17 Single Module Overload Test  (Read 525 times)

onanparts

  • Hero Member
  • *****
  • Posts: 692
    • onanparts.com
10,000 Watt B17 Single Module Overload Test
« on: September 13, 2022, 11:33:50 PM »
So this afternoon I was able to hit 10kW for a couple minutes on the DC input side of a single module, 200 amps at 50V! 8.4kW on the AC output, 35 amps per leg! Output was solid at 239 VAC. Even at this extreme level, all magic smoke remained internal. :) Forget about any efficiency numbers, this is way beyond design parameters!

The anti suicide protection kicked in when I tried to go past 70 amps total AC load. It will be set much lower for production models.....:)


« Last Edit: September 13, 2022, 11:36:06 PM by onanparts »
I got the deluxe kit, it had a solar cell and a meter.

Midnite B17-10. 30kW Cont. 100kW Surge... Me/Myself/And/I

Highflyer

  • Sr. Member
  • ****
  • Posts: 254
Re: 10,000 Watt B17 Single Module Overload Test
« Reply #1 on: September 17, 2022, 08:54:16 AM »
I would be amazed, but history has inoculated me.  Awesome job, Is it ready NOW?  Can you please start building them for the rest of us, please?
Brian

The one thing is the one thing

grgdgreek

  • Full Member
  • ***
  • Posts: 129
Re: 10,000 Watt B17 Single Module Overload Test
« Reply #2 on: September 18, 2022, 05:36:36 AM »
I would be amazed, but history has inoculated me.  Awesome job, Is it ready NOW?  Can you please start building them for the rest of us, please?
+1
Home:6*135w mitsu.10*175w shuko. 2* cl150.3*D400 turbines.
Rolls18*4v series 5000 545ah*3 .2*Victron 3000 multiplus inv/chg. 24v. Shop:28*185w shuko. Sunny island. Sunnyboy.Rolls 40*s530.48volt.Sunny web box.