Installing 2 Classics on same system(separate solar array)

Started by pao2, October 17, 2022, 07:06:51 PM

Previous topic - Next topic

pao2

It's a bit confusing to figure out how to install 2 classics on the same system. Does anyone know where I can find a wiring diagram that has 2 controllers, whizbang jr. and other cables indicated. Ethernet, battery temp sensor, etc. Would also be great if anyone knows where there might be a video on this subject.  Have the second 250 headed my way and need to get all this interconnection and software settings correct. Thanks much.

ClassicCrazy

You can either just use two Classics with their own settings, or you can hook them up in Follow Me mode. Both the Classics will share one temperature sensor if you do Follow Me.
Here are some instructions for setup
http://www.midniteftp.com/support/kb/faq.php?id=112

Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

ClassicCrazy

system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

pao2

Thank you very much for this information. It will definitely get me going. Do you happen to know if both controllers will get access to the whizbang jr data in the follow me scenario?  Also, would you know if anyone has ever put 2 whizbang jr boards on a single shunt so that the 2 controllers have access to  independent information and would probably be able to be managed totally separate from each other? Probably a dumb thought but can't help but ask. lol.

ClassicCrazy

You really only need one whizbang since both controllers will be charging the same battery - so you will know everything going into and out of the battery.
If you just use one whizbang then you have Aux 2 available on the second Classic - which is nice since then  you can do pwm stuff with it that isn't available on Aux 1 .
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable

pao2

Thanks much. I'll probably be setting up the second controller in a couple of weeks and might need to get some more inputs. Will go with the follow me setup you recommended and see how it goes.
Phil

ClassicCrazy

okay - it is pretty straight forward . Let us know how it goes
Larry
system 1
Classic 150 , 5s3p  Kyocera 135watt , 12s Soneil 2v 540amp lead crystal for 24v pack , Outback 3524 inverter
system 2
 5s 135w Kyocero , 3s3p 270w Kyocera  to Classic 150 ,   8s Kyocera 225w to Hawkes Bay Jakiper 48v 15kwh LiFePO4 , Outback VFX 3648 inverter
system 3
KID / Brat portable