News:

To visit MidNite Solar click this link www.midnitesolar.com

Main Menu

aux 1 not working

Started by bennyspoon, November 10, 2013, 11:43:39 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

bennyspoon

November 10, 2013, 11:43:39 PM
hey gang, anyone know of any reason why i wouldn't have an output voltage at the aux 1 terminal when it is activated and appearing on the screen as such. aux 2 is working fine. when aux 1 is activated in the aux menu a relay type sound can be heard, not so on aux 2- is this due to pwm nature of aux 2? any thoughts?
ben.
48v system, 2 solar kids synced{1500w x2 arrays of trina honey 250w}with a 3rd kid synced for hydro f+p 700w turbine{early days!}, classic 150 for 4275w solar ,classic 250/ac clipper for wind {coming} , schneider xw+ 8548 inverter 645ah ex ups exide  jtt12v4800 ,3 strings{fingers crossed}.

Halfcrazy

#1
November 11, 2013, 06:01:14 AM
Inside on the bottom left corner of the circuit board is a set of jumpers. There are 2 rows of 3 pins. Yours are on the middle and right pins giving you a isolated relay on Aux1. Move them to the left and middle pins and you will get 12v out.

http://ryan.midnitesolar.com/PDF/Vent%20Fan.pdf
Ryan
Changing the way wind turbines operate one smoke filled box at a time

bennyspoon

#2
November 12, 2013, 07:15:35 PM
 oops, now i feel foolish. thanks for that info ryan.
48v system, 2 solar kids synced{1500w x2 arrays of trina honey 250w}with a 3rd kid synced for hydro f+p 700w turbine{early days!}, classic 150 for 4275w solar ,classic 250/ac clipper for wind {coming} , schneider xw+ 8548 inverter 645ah ex ups exide  jtt12v4800 ,3 strings{fingers crossed}.
Print
Go Up Pages1
User actions