Print Page - Hydrovolt Question

Title: Hydrovolt Question
Post by: Resthome on December 23, 2016, 01:04:29 AM

I have a question for anyone using a MidNite Hydrovolt. I have a Flow-Rite watering system on my battery bank that fills each cell to the correct level from a jug of distilled water. It has a very small hole for a hydrometer with a small filler tube. Can anyone give me the outside diameter of the filler tube that is on the Hydrovolt?
,
From the picture it looks like it might be small enough to fit into the Flow-Rite Millennium battery caps for taking S/G readings.

Title: Re: Hudrovolt Question
Post by: SolarMusher on December 23, 2016, 05:03:55 PM

Hi John,
6mm for the outside diameter filler tube.
A+
Erik

Title: Re: Hudrovolt Question
Post by: Resthome on December 24, 2016, 12:13:40 AM

Thanks Erik. :)

Title: Re: Hydrovolt Question
Post by: TomW on December 24, 2016, 11:38:09 AM

Just to be a stickler.

I think it is actually called Hydrovolt?

Makes searches work better, mostly.

Tom

Title: Re: Hydrovolt Question
Post by: Resthome on December 25, 2016, 12:12:52 AM

You are correct Tom. Thanks for the correction. Modified my post

Title: Re: Hydrovolt Question
Post by: SolarMusher on December 25, 2016, 07:28:21 AM

Anyway..., it's the same diameter for both ;D
Merry Christmas!
A+
Erik

A Forum run by Enthusiasts of MidNite Solar

The Open Source software/hardware corner => General info => Topic started by: Resthome on December 23, 2016, 01:04:29 AM