boB..
What is the RFR code 38? I saw the Classic resting today after I had done a short manual Equalize and then manually Stop Equalize. The Classic went to RESTING shortly after and the Local App indicated it was code 38. I don't show a RFR 38 in any of the lists I currently have is there an updated RFR List that has 38 on it? If so could you post the list. Thanks
RFR 38 is fairly new.
What it means is that the Classic saw the battery voltage above the set-point voltage
AND near zero watts output for 90 seconds.
ReasonForResting = 38 8-4-2015 External charger. zero watts @ set point 90 sec
Normally you don't want it to just go to resting but, in this case, it's OK for it to at least check.
Possibly, a secondary charging source.
The Classic will stay in Resting for at least 15 seconds before re-trying to give the battery voltage
a chance to drop below set point.
boB
Thanks boB..
That would be the case when coming out of Equalize mode. It took a few minutes for the voltage to drop down to the Float set point and the charging had gone to zero because I had no load on the system at the time.
I applied a little load of around 4 amps and after a few minutes it when to float. I'll have to look at the exact data from the LA.
Yeah, in that case it just didn't need to turn on for a while.
Good deal.
boB