A Forum run by Enthusiasts of MidNite Solar

General Category => General Discussion => Topic started by: Corndog on March 21, 2020, 10:31:00 AM

Title: Local Status Panel
Post by: Corndog on March 21, 2020, 10:31:00 AM
Hello,
Can I please get a clarification on exactly what this reading is, I have had two different answers

1. what the panels are providing
2. what the charger / system is using and the remainder into the ground

If you know where this may have been answered or a tutorial that would help please share.

Thank you in advance.
Title: Re: Local Status Panel
Post by: Vic on March 21, 2020, 01:05:00 PM
That is the power production,  at that moment.

This is the real-time power being produced.  It must have a place to go,  in order to show on this gauge. (the uses of this power,  is  for charging batteries,  loads on inverter's,  or,  perhaps selling to the Grid,  etc).

There is a Local App Topic on this site:
http://midniteftp.com/forum/index.php?board=9.0

   And,   there are some Videos on using the LocalApp:
On the MidNite Solar site,  on the following page,   find Classic MPPT Charge Controller Videos,   and scroll down to Tutorials on the Local App:
http://midnitesolar.com/videoDisplay.php

FWIW,   Vic
Title: Re: Local Status Panel
Post by: Corndog on March 21, 2020, 01:17:55 PM
Thank you.

Very much appreciated . How did I not see that video .. Ugh thank you
Stay safe and healthy
Title: Re: Local Status Panel
Post by: Vic on March 21, 2020, 03:21:13 PM
Hi Corndog,

You are welcome.   You kind of have to know where to look for the Video.

Good Luck,   and be safe and careful.   Thanks,   Vic