Disconnect order Make/Break or Break/make

Started by Westbranch, April 13, 2012, 07:46:13 PM

Previous topic - Next topic

Westbranch

Is the MN transfer switch a Make before Break or vice versa?

I am looking for a transfer switch that will change over from PV/battery to Gen when I start it up, but thinking this through I realized that it might be better to make first in case the fridge is running.

Comments?
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Halfcrazy

All of our switches are Break before Make. You would likely get bad things happening if it was Make before Break do to back feeding.


Ryan
Changing the way wind turbines operate one smoke filled box at a time

Westbranch

thanks Ryan, so how does one mange the 'break' on appliances that are 'in motion' when you 'break' without causing hiccups?

I was looking at some auto-transfer switches and I saw 14 mili-seconds for switch over time, which seemed , to me , to be quite seamless. 
thanks
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come