Originally left the remote controller cradled to the controller. Now I want to relocate it. Please tell me about the wire I need to use.
Thank you.
Glenn
Glen,
I would use a wire similiar to cat5 cable and crimp the 6 conductor phone jacks on if you need to go more than say 10 feet. The manual shows the pinout but it is Pin 1 on one end goes to pin6 on the other so a mirror image
Admin,
Thank you. I did not see the pin out in the manual. I’ll look again.
Glenn
This document, even though it is for follow me, shows the cable and pin out