The install manual indicates not to "bond" the "battery negative" to the "ground". Well, this is a motorhome so all are the same, correct? The only time it will have a true "ground" is when connected to the "grid" through the power cord. Do I need to address this in any way?
3 Each 215 watt panels on roof to:
3 Each 12 amp breakers in combiner box on roof to:
1 Each 40 amp breaker in Big Baby inside to:
MidNite Classic 150 to:
1 Each 40 amp breaker to:
Battery Bank / 2000watt sine wave inverter
Thanks in advance
No I think you are all set as an RV usually has battery negative and chassis ground as one in the same. You may want to verify that with a volt meter just to be certain.
Ryan