combination of two 24 volt battery banks to obtain a 48 volt systems

Started by bafaro, March 22, 2015, 05:40:01 PM

Previous topic - Next topic

bafaro

Hello everyone, I need help building my 48 volt battery bank. in fact, I currently have two battery banks with a capacity of 3300 amps hours each, with a 24 volt system. The two banks have different types of batteries. The main bank is made of 12 stationary batteries 2 volts, to lead. the second bank is made of 12-volt batteries, sealed. I want to migrate my 24 volt system to 48 volts, but the main bank of 12 batteries can not exceed 24 volts unless it increases to 24 for 48-volt battery system. my question is this: is what I can put in series the two banks to bring my 48-volt system. I currently haven’t the means to have 12 additional batteries 2 volts and more current storage capacity is enough. Thank you for your help.

mike90045

That's going to be very hard to accomplish with 2 different battery styles.    Sorry, I can't think of a way to make it safely work for you.
http://tinyurl.com/LMR-Solar

Classic 200| 2Kw PV, 160Voc | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph )| Listeroid 6/1, st5 gen head | XW6048 inverter/chgr | midnight ePanel & 4 SPDs | 48V, 800A NiFe battery bank | MS-TS-MPPT60 w/3Kw PV


Westbranch

Mer I pour votre à is   =  I sea is at your


qu'est-ce que c'est?   ???
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

bafaro