Hi Guys just looking for confirmation of using a MNS SPD 115 for the following Well Pump with MPPT controller.
It is a Solar Only DC Well pump using a MPPT Controller the operating voltage for the pump is 72v - 96v and a Max VOC for the panel input of 200v to the MPPT controller and a max Vmp of not less than 102 v. Nominal battery bank if used would be 96v. But in this case I believe its a solar operation only. Attached is a link to the PDF the model in question is a PS1200 Hr by Lorentz
http://www.lorentz.de/pdf/lorentz_ps_pi_en.pdf
Regards Nigel, Ryan ignore my tel message its not an AC pump as he originally told me !
Nigel
Consider it ignored. I would say the 115 would be a touch to close for comfort in some situations so I would recommend a SPD300.
Ryan