48v Calb lithium system in Wisconsin

Started by ClassicCrazy, January 19, 2016, 01:42:00 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

Westbranch

#15
January 20, 2016, 07:23:24 PM Last Edit: January 20, 2016, 07:27:30 PM by Westbranch
Sorry Larry,  ::),  it was Clouds photo... http://kb1uas.com/mnsforum/index.php?action=dlattach;topic=2875.0;attach=4376

And it sure looks corroded to my eye, all my tinned ones are a fair bit brighter...

note the brightness of Larry's last pic...
KID FW1811 560W >C&D 24V 900Ah AGM
CL150 29032 FW V.2126-NW2097-GP2133 175A E-Panel WBjr, 3Px4s 140W > 24V 900Ah AGM,
2 Cisco WRT54GL i/c DD-WRT Rtr, NetGr DS104Hub
Cotek ST1500 Inv  want a 24V  ROSIE Inverter
OmniCharge3024  Eu1/2/3000iGens
West Chilcotin 1680+W to come

Cniemand

#16
January 20, 2016, 08:09:40 PM Last Edit: January 20, 2016, 08:11:23 PM by Cniemand
Ha! Not corroded in my view here in person. Suppose I could take some lemon pledge and a towel to it to polish it up a bit if I wanted it shiny-shiny. ;-) All my connections are clean, tight, and simple runs.

I only have one cable like that. It was made/given by a local solar installer that I purchased a 175 amp Midnite DC disco from. The others I made with Copper terminals.
OFF-GRID @ 8500FT : 2000w Array : 8 - CS6P-250P ; VFX 3648 ; WBjr ; MN CL200 #6738 ; FW #2079  
48v LiFePo4 : 16 - CALB CA 100 aH in Series - 5 kWh ; No Active BMS - Bottom Balanced
Charging Parameters : Bulk - 55v, Absorb - 5 EndAmps @ 55v, Float - 54v or 3.375v per Cell : ZERO EQUALIZE
Print
Go Up Pages 1 2
User actions