Text only | Text with Images

A Forum run by Enthusiasts of MidNite Solar

Gallery of Installation pictures => Owner Installed system pictures => Topic started by: mtfalk64 on May 07, 2013, 08:42:52 PM

Title: These battery connections are easy to use.
Post by: mtfalk64 on May 07, 2013, 08:42:52 PM
This may help some connect your batteries together without special tools or having to run and get wires cut and crimped.

You can buy these at Home Depot or Lowes, but I believe Home Depot you get two in the package for the price of Lowes package of one.

Easy to connect multi battery cables to one terminal and you can cut your wire as short as needed.

Hope this helps

Mike

Title: Re: These battery connections are easy to use.
Post by: mtfalk64 on May 07, 2013, 08:51:53 PM
Another shot.
Title: Re: These battery connections are easy to use.
Post by: mtfalk64 on May 07, 2013, 08:54:30 PM
This clamp allows me to connect two heavy gauge to my bigger inverter
Title: Re: These battery connections are easy to use.
Post by: Westbranch on May 07, 2013, 11:24:01 PM
Mike, is that last one tinned copper or Aluminum?
Title: Re: These battery connections are easy to use.
Post by: mtfalk64 on May 08, 2013, 05:43:05 PM
aluminum, if my memory serves me without finding the package this is the ones I purchased.  I believe they are rated for 150amps

http://www.homedepot.com/p/Blackburn-Type-ADR-2-Conductor-1-Hole-Mount-Wire-Connectors-for-1-0-Stranded-Max-Wire-2-Pack-ADR11-21-B2-5/100172941


The copper ones I believe were these.  They are rated for 200amps

http://www.homedepot.com/p/Blackburn-3-0-Stranded-to-4-Stranded-Type-BC-Single-Conductor-1-Hole-Mount-Wire-Connectors-2-Pack-BTC3104-B2-5/100183915

Mike
Text only | Text with Images