Text only | Text with Images

A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Classic FAQs => Topic started by: davisk57 on September 05, 2014, 07:03:32 AM

Title: Classic 150 Won't Equalize
Post by: davisk57 on September 05, 2014, 07:03:32 AM
When I set my Classic 150 to EQ, it displays EQ DONE but does not start the EQ process. What am I missing?
Title: Re: Classic 150 Won't Equalize
Post by: Vic on September 05, 2014, 11:40:56 AM
Have you set an EQ time value?

From the Classic Manual,

>"Manual EQ
To do a manual Equalization charge, Go into the Charge menu and highlight “EQ” and press “Enter”. Now “EQ Stopped” will be highlighted. Scroll up to select “Eq Started”. Press the “Status” button to return to the home screen. To stop a manual EQ in progress simply reverse the steps above. A manual EQ when started will last for that day unless the Classic is on say Hydro or Wind and the controller never goes to Resting that night, in this case it will stay in EQ until it completes or the controller goes to Resting."<

FWIW,   Vic
Title: Re: Classic 150 Won't Equalize
Post by: boB on September 05, 2014, 01:56:13 PM

Yes, make sure the EQ TIME is set for something other than 0 hours (which it probably is already)...

You might try rebooting the Classic ?

Also, can you note the date and/or software revision of the Classic/MNGP by pressing the
STATUS button about 5 or 6 times until the information screen comes up ?

boB
Text only | Text with Images