Can any one direct me to any diagrams concerning using the SPD in a 230 VAC European configuration?
Where are you thinking of adding this unit ? And what unit do you have ? AC or DC ?
Pick it here :http://www.midnitesolar.com/products.php?menuItem=products&productCat_ID=23&productCatName=Surge%20Protection%20Devices
VT
I need information of how to wire the SPD to the AC side (230V 50Hz system) which has one Line, one Neutral and one Ground.
Thanks
Marc-Paul
red to hot
black to neutral
green to ground
is how I would do it, Red and black are interchangeable if so desired though
Thats the same way I would do it .
No 90* wire bends , All sweeping curves from buss to the SPD .
VT
You do have one of these : MNSPD-300-AC
Quote from: CDN-VT on October 11, 2016, 07:24:10 PM
Thats the same way I would do it .
No 90* wire bends , All sweeping curves from buss to the SPD .
VT
You do have one of these : MNSPD-300-AC
Don't forget the shortest leads possible, as well.
T