Text only | Text with Images

A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Topic started by: DevoDave on February 03, 2019, 07:46:59 PM

Title: Classic 150 clearing Lifetime AH figures on WBJR more screen
Post by: DevoDave on February 03, 2019, 07:46:59 PM
I have cleared the daily, hourly, and Lifetime logs through the MNGP LOG menu, and even got an 'OK' when I executed 'reset Logs all' and 'reset Logs kW-Hours' via the terminal on the USB port.

Regardless, I still see a huge Lifetime +AH figure on the WHIZBANG JUNIOR SHUNT.... MORE screen.

Is there any way to clear this? I just installed new lithiums so I would like to zero the figure.

Running a freshly installed set of firmware. 2193 Classic and 2186 MNGP.
Title: Re: Classic 150 clearing Lifetime AH figures on WBJR more screen
Post by: ClassicCrazy on February 03, 2019, 08:23:10 PM
On the MNGP Logs screen , press enter, then up buttons and on mine I see Clear WB Jr Net amp hours, wb pos ah , wb neg ah . Did you clear all those too ?
maybe repower the Classic if you don't see them clear right away and see if that does it .

I have firmware 2197 MNGP
2245 Classic

Larry
Title: Re: Classic 150 clearing Lifetime AH figures on WBJR more screen
Post by: DevoDave on February 03, 2019, 08:44:17 PM
Yep. That fixed it. I had to do one of them a couple of times as it sat there saying CLEARING DATA for five minutes but maybe the order you clear them matters.
Title: Re: Classic 150 clearing Lifetime AH figures on WBJR more screen
Post by: ClassicCrazy on February 03, 2019, 09:34:05 PM
Glad to hear that you got it cleared.

Larry
Title: Re: Classic 150 clearing Lifetime AH figures on WBJR more screen
Post by: boB on February 03, 2019, 09:54:33 PM
Five minutes !?!?!?!   The message itself stuck, I think.

I seem to remember that happening some times
Text only | Text with Images