Today I installed the December firmware update on my 150 classic. It running but I am getting OCP is OFF. Can anyone help with this.
You just have to do a VMM. To do this first turn the battery and solar power to the Classic off. Next, turn the battery power back on while holding the Left and Right arrows. Hold the arrows until the first "Solar, Wind or Hydro" screen pops up. Follow the on screen prompts and continue setup. Note: This will reset all settings to factory defaults. You will need to reset any custom settings such as Aux 1 and 2. You may want to write these settings down for reference prior to resetting the Classic.
Hope this help,
Erik
Yep, Eric nailed it. A common issue easily fixed. The error is not a big deal, either, if you let it go as is I don't think.
Enjoy!
Tom
Thanks
Everything has been smooth going.