Print Page - Classic output voltage limit ?

Title: Classic output voltage limit ?
Post by: SolarMusher on February 04, 2013, 01:40:10 PM

Could I use limit to limit the max absorb voltage with temp comp on my 48V system?
I have 24Vdc fridge and freezer which are limited to 31.5V using step down converter but I would like to absorb at 62Vdc.
It could go up to 64V with temp compensated so too high (+32V) for my freezer and fridge, I would like to limit the max absorb voltage to 63V max (temp comp) to keep them safe.
Any thoughts?
Erik

Title: Re: Classic output voltage limit ?
Post by: SolarMusher on February 04, 2013, 01:59:04 PM

Ok, I've used temp comp max Voltage in Limit and it's working fine ;D
I'm going to use 62V absorb for one month to see if my batteries like this setting.
Erik

Title: Re: Classic output voltage limit ?
Post by: boB on February 04, 2013, 02:45:21 PM

You found !

Good deal !

A Forum run by Enthusiasts of MidNite Solar

Charge Controllers and Clippers => The "Classic" charge controller => Topic started by: SolarMusher on February 04, 2013, 01:40:10 PM